German Lake People’s well-known fully balanced transistor amp V281 has announced the discontinuation of production. At the same time, the manufacturer will finally release 70 "Ultimate Edition" V281 with built-in USB decoding function.(Final Edition); There are only 10 units in China. This ultimate version of V281 amp supports 24Bit/192kHz, and the USB cable can be connected to digital broadcast or computer to decode and amplify to drive the headset.
Features of V281 Final Edition
Keep all the features of the original V281 amp
-True balance amplification, 4-way amplification module
-8 transistors per channel, 32 in total in the signal path
-Balance drive earphone, equipped with 4-PIN XLR earphone port
- 2 silver-plated Nutrick 6.35 single-ended headphone ports
- Pre-stage output is adjustable(Adjustable/fixed level)
-Gold-plated balanced/single-ended input and output
- Ultra low noise, extremely high signal-to-noise ratio
- Ultra high output voltage(60V working voltage, perfect for driving high-impedance headphones)
- Large current output(To perfectly drive low impedance earphones and flat earphones)
- Super high damping coefficient, super control
- 5 levels of pre-gain, corresponding to different loads
- Physical channel isolation
- DC coupling, isolated DC
- Switch machine headphone protection
-ALPS RK27 volume control
-ALPS RK27 channel balance control
-Application of 0.1% and 1% high-precision metal film resistors
-High-quality MKP capacitors are used in signal paths
-36000μF super-capacity power supply filter capacitor
- 25+15W double toroidal transformer
-Aluminum feet
-Front panel input, output, mute, channel balance control
And on this basis, the USB input function is added to become a decoding amp/preamp that can be directly connected to the computer
-XMOS USB interface
-Support 24/192
V281 Final Edition product specifications
enter: | 1 pair of XLR, 1 pair of RCA, USB(24/192 kHz) |
Pre-output: | 1 pair of XLR, 1 pair of RCA |
Headphone output: | 4-PIN XLR, 2 x 6.35 mm |
Frequency Range: | 5 Hz-70 kHz(-0.5 dB) |
Input sensitivity: | +6 dBu |
input resistance: | 10 kOhm |
Output impedance: | <0.01 Ohm(Single-ended) |
Maximum input level: | +21 dBu |
Maximum output level: | 2700 mW(600 Ohm)/ 5600 mW(100 Ohm)/ 4200 mW(50 Ohm)/ 2800 mW(32 Ohm)/1500(16 Ohm) |
Signal to noise ratio: | >129 dB(A-wt.) |
Crosstalk: | -105 dB |
power supply: | 40 W / 230 V |
size: | 170 x 112 x 320 mm(WxHxD) |
weight: | 4.6 kg |